| Swing over bed | 360mm(14") |
| Swing over cross slide | 224mm(8-13/16") |
| Swing in gap diameter | 502mm(19-3/4") |
| Swing in lenght | 210mm(8-1/4") |
| Center Height | 179mm(7") |
| Admits between | 1000mm(40") |
| Bed width | 187mm(7-3/8") |
| Bed length | 1655mm(65-1/8") |
| Bed heigth | 290mm(11-13/32") |
| Spindle bore | 38mm(1-1/2") |
| Spindle nose | D1-4" |
| Taper in nose | MTN0.5 |
| Speeds number | 8 |
| Range of spindle speed | 70-2000 r/min |
| Cross slide width | 130mm(5-3/32") |
| Cross slide travel | 170mm(6-11/16") |
| Compound rest width | 80mm(3-1/8") |
| Compound rest travel | 95mm(3-9/16") |
| Lead Screw diameter | 22mm(7/8") |
| Lead Screaw thread | 8T.P,I or 3 mm |
| Feed rod diameter | 19mm(3/4") |
| Cutting tool max section | 16mmx16mm (5/8"x5/8") |
| Threads imperial pitches | 34 Nos. 4-56 T.P.I |
| Threas metric pitches | 26 Nos. 0,4-7M.P |
| Longitudinal feeds imperial | 32 Nos.0.002-0.548" /Rev |
| Longitudinal feeds metric | 32 Nos.0.052-0.392mm /Rev |
| Cross feeds imperial | 32 Nos.0.007-0.0187" /Rev |
| Cross feeds metric | 32 Nos.0,014-0.380mm /Rev |
| Quill Diameter | 32mm (1-1/4") |
| Quill travel | 100mm(3-15/16") |
| Quill taper | MTNO.3 |
| Main Motor | 1.5kW(2HP) |
